Changing the settings of an antenna is something that you would surely be able to do. However, you have to know the right flow so that this thing would really be able to serve its purpose. This can be helpful for your work and save you a lot of money since you shall not call a professional even for an advice.
The first thing that you should avoid doing is to paint this object. A military CB antenna can be sensitive and this is not the right time for you to bring out your colorful personality. Everything has to blend well with your car for work to keep you from getting reprimanded by your superiors.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Look for the cable at the bottom of this thing. You have remove the cover in that part with the use of a screwdriver. If there are a lot of cables for you to choose from, go for the one that has screw adjustments since you would have to mess with these things for the next step. Just make sure that you got the right one.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Have the right length of cable to connect the antenna and the CB. Do not skim on this one so that you would not go to the store once again. Moreover, wear protective glove since this is the part where in a fitting task would be done. That involved heat with some of the parts and you really have to protect yourself.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Use a SWR meter to see if you got the measurements right. If there has been a mistake, be very patient in starting all over again. Buy the same set of materials and know where you got it wrong this time around.
The lid at the bottom must be tightly closed after the modification. Air can be very harmful for wires. Thus, check the screws once again and do not hesitate to tape it up if you are confident that you already got everything right for the nth time.
The first thing that you should avoid doing is to paint this object. A military CB antenna can be sensitive and this is not the right time for you to bring out your colorful personality. Everything has to blend well with your car for work to keep you from getting reprimanded by your superiors.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Look for the cable at the bottom of this thing. You have remove the cover in that part with the use of a screwdriver. If there are a lot of cables for you to choose from, go for the one that has screw adjustments since you would have to mess with these things for the next step. Just make sure that you got the right one.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Have the right length of cable to connect the antenna and the CB. Do not skim on this one so that you would not go to the store once again. Moreover, wear protective glove since this is the part where in a fitting task would be done. That involved heat with some of the parts and you really have to protect yourself.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Use a SWR meter to see if you got the measurements right. If there has been a mistake, be very patient in starting all over again. Buy the same set of materials and know where you got it wrong this time around.
The lid at the bottom must be tightly closed after the modification. Air can be very harmful for wires. Thus, check the screws once again and do not hesitate to tape it up if you are confident that you already got everything right for the nth time.
About the Author:
If you are searching for information about a military CB antenna, go to our web pages online here today. Additional details are available at http://www.hascall-denke.com now.
0 commentaires:
Enregistrer un commentaire